instantreality 1.0

• Node 12
• EngineBaseNode 13
• Viewarea 3
• StandardViewarea 7
• CyclesViewarea 1
• CyclesPathTracingViewarea

XML encoding

<CyclesPathTracingViewarea cyclesEnabled='TRUE'
cyclesPaused='FALSE'
deviceId='0'
ignoreViewModifiers='FALSE'
renderWindowTile='FALSE'
overrideZNearFar='1e-5 1e5'
red='TRUE'
green='TRUE'
blue='TRUE'
alpha='TRUE'
leftBuffer='TRUE'
rightBuffer='TRUE'
enabled='TRUE'
view=''
background=''
foreground=''
environment=''
user=''
fog=''
lowerLeft='0 0'
upperRight='1 1'
description=''
grabFrames='0'
grabFile='frame%04d.png'
statisticLevel='0'
keyPress='0'
keyRelease='0'
mousePress='0'
mouseRelease='0'
mouseMove='0 0'
logFeature=''
 />

Classic encoding

CyclesPathTracingViewarea {
	cyclesEnabled TRUE
	cyclesPaused FALSE
	deviceId 0
	ignoreViewModifiers FALSE
	renderWindowTile FALSE
	overrideZNearFar 1e-5 1e5
	red TRUE
	green TRUE
	blue TRUE
	alpha TRUE
	leftBuffer TRUE
	rightBuffer TRUE
	enabled TRUE
	view [""]
	background [""]
	foreground [""]
	environment [""]
	user [""]
	fog [""]
	lowerLeft 0 0
	upperRight 1 1
	description ""
	grabFrames 0
	grabFile "frame%04d.png"
	statisticLevel 0
	keyPress 0
	keyRelease 0
	mousePress 0
	mouseRelease 0
	mouseMove 0 0
	logFeature [""]
}

Filter: X3D only | Avalon only | All

id	Name	DataType	PartType	Default	ValueType	Description
	alpha	SFBool	inputOutput	TRUE		If FALSE, the alpha color component is removed.
	background	MFString	inputOutput			Names of background objects that should be used on this viewarea. If no name is given, the currently bound background is used. If more than one name is given, the first valid backgound is used
	blue	SFBool	inputOutput	TRUE		If FALSE, the blue color component is removed.
	cameraOptions	SFNode	inputOutput		CyclesCameraOptions	A CyclesCameraOptions node that controls the camera associated with this Viewarea.
	cyclesEnabled	SFBool	inputOutput	TRUE		Enable rendering with cycles. If false, the default (rasterization) renderer is used.
	cyclesPaused	SFBool	inputOutput	FALSE		Pause rendering with cycles. Rendering can be resumed from where it left off by setting this to false again.
	description	SFString	inputOutput			Textual description of this viewarea
	deviceId	SFInt32	inputOutput	0		Device id to use. 0 is usually the CPU and always present, CUDA and OpenCL devices have higher ids.
	displayFilter	MFNode	inputOutput		DisplayFilter	Holds all optional display filter nodes
	enabled	SFBool	inputOutput	TRUE		If FALSE, rendering is disabled
	environment	MFString	inputOutput			Names of environment objects that should be used on this viewarea. If no name is given, the currently bound background is used. If more than one name is given, the first valid environment is used
	filmOptions	SFNode	inputOutput		CyclesFilmOptions	A CyclesFilmOptions node that controls the film associated with this Viewarea.
	fog	MFString	inputOutput			Names of fog bindable objects that should be used on this viewarea. If no name is given, the currently bound fog is used. If more than one name is given, the first valid fog is used
	foreground	MFString	inputOutput			Names of foreground objects that should be used on this viewarea. If no name is given, the currently bound foreground is used. If more than one name is given, the first valid foreground is used
	grabFile	SFString	inputOutput	frame%04d.png		Filename that should be used to save grabed images. A sequence number can be used with the sprintf %d operator.
	grabFrames	SFInt32	inputOutput	0		If value positive, 'value' rendered images are grabed and written into a file given by grabFile, if value=-1, grabbing is always done, if 0, it is disabled.
	green	SFBool	inputOutput	TRUE		If FALSE, the green color component is removed.
	ignoreViewModifiers	SFBool	inputOutput	FALSE		If true, view modifiers are ignored. Currently CyclesViewarea does not support off-center projection, so most of the modifiers won't work correctly. If you experience problems you can at least get the 'default' camera back with this field. This _only_ applies to rendering with Cycles (cyclesEnabled==true), the rasterization bypass is not affected!
	integratorOptions	SFNode	inputOutput		CyclesIntegratorOptions	A CyclesIntegratorOptions node that controls the integrator associated with this Viewarea.
	keyPress	SFInt32	inputOutput	0		Key press event output
	keyRelease	SFInt32	inputOutput	0		Key release event output
	leftBuffer	SFBool	inputOutput	TRUE		If TRUE, rendering is done to the view buffer for the left eye
	logFeature	MFString	inputOutput		state, child, parent, route, eventIn, eventOut	controls the logging of changes, state: log state changes (e.g. live), child: log child add/remove, parent: log parent add/remove, route: log route add/remove; eventIn: log receiving of events, eventOut: log sending of events: guiView, runtime system should create node-view, guiEdit: runtime system should create node-editeverything: log everything
	lowerLeft	SFVec2f	inputOutput	0 0		Lower left corner of the viewarea. Values less or equal then 1 are treated as relative values. If values are greater then 1, the values are treated as number of pixels
	message	SFString	outputOnly			Message to be processed. Valid messages are: toggleFullScreen toggleHeadlight toggleGlobalShadow nextShadowMode toggleLazyInteractionEvalution toggleDrawVolume toggleCullFrustum toggleCullOcclusion nextDrawMode pointDrawMode lineDrawMode fillDrawMode nextInfoScreen firstView lastView nextView prevView resetViewPosition showAll walkNav flyNav freeFlyNav examineNav lookatNav noneNav forward backward left right exportBackendASC exportBackendBIN exit
	metadata	SFNode	inputOutput		MetadataObject	container for payload metadata inside MetadataSet element
	modifier	MFNode	initializeOnly		ViewModifier	Modifiers are used to add additional features to the viewing matrix. This is used for tiled displays or other complex projections.
	mouseMove	SFVec2f	inputOutput	0 0		Mouse move event. Gives the position of the mouse in 2D window space
	mouseOver	SFBool	inputOnly	FALSE		Emits true, if mouse points to a pointing sensor
	mousePress	SFInt32	inputOutput	0		Mouse button press event output
	mouseRelease	SFInt32	inputOutput	0		Mouse button release event output
	navigator	SFNode	inputOutput		Navigator	Navigator object used for user interaction
	overrideZNearFar	SFVec2f	inputOutput	1e-5 1e5		If larger than 0 overrides Viewpoint's zNear/zFar values (if rendering with Cycles). Per default the override is active, because the automatic adaption of zNear/zFar causes problems in Cycles. If all Viewpoints have explicit zNear/zFar values the override can be deactivated by setting (-1,-1).
	red	SFBool	inputOutput	TRUE		If FALSE, the red color component is removed.
	renderWindowTile	SFBool	inputOutput	FALSE		If true, this Viewarea is regarded as a tile of the parent window. The camera is interpreted with respect to the whole window, but only the Viewarea is rendered. This enables a basic version of tiled rendering, even though TileViewModifier does not work. If false, the Viewarea is regarded as 'independent'. The camera is interpreted with respect to the Viewarea. This interplays with ignoreViewModifiers. This _only_ applies to rendering with Cycles (cyclesEnabled==true), the rasterization bypass is not affected!
	rightBuffer	SFBool	inputOutput	TRUE		If TRUE, rendering is done to the view buffer for the right eye
	sceneOptions	SFNode	inputOutput		CyclesSceneOptions	A CyclesSceneOptions node that controls the scene associated with this Viewarea.
	sessionOptions	SFNode	inputOutput		CyclesSessionOptions	A CyclesSessionOptions node that controls the session associated with this Viewarea.
	statisticLevel	SFInt32	inputOutput	0		Statistics level
	targetTextures	MFNode	inputOutput		SingleTexture	The textures to render to. Hint: Use a SolidTexture.First entry is the output buffer (the displayed image), specialized nodes may expose additional buffers.
	touchPoints	MFVec4f	outputOnly			Touch points (x, y, id, button state) with button press 0, release 1, move 2.
	upperRight	SFVec2f	inputOutput	1 1		Upper right corner of the viewarea. Values less or equal then 1 are treated as relative values. If values are greater then 1, the values are treated as number of pixels
	user	MFString	inputOutput			Names of user bindable objects that should be used on this viewarea. If no name is given, the currently bound user is used. If more than one name is given, the first valid user is used
	view	MFString	inputOutput			Names of viewpoint objects that should be used on this viewarea. If no name is given, the currently bound viewpoint is used. If more than one name is given, the first valid viewpoint is used.