instantreality 1.0

• Node 12
• SceneBaseNode 17
• Bindable 6
• ViewBindable 3
• GeoViewpoint

XML encoding

<GeoViewpoint geoSystem=''GD','WE''
fieldOfView='0.785398'
orientation='0 0 1 0'
position='0 0 100000'
headlight='TRUE'
navType='EXAMINE'
speedFactor='1.0'
zNear='-1'
zFar='-1'
jump='TRUE'
retainUserOffsets='FALSE'
isDefault='FALSE'
description=''
triggerName='Synchronize'
logFeature=''
 />

Classic encoding

GeoViewpoint {
	geoSystem ["'GD','WE'"]
	fieldOfView 0.785398
	orientation 0 0 1 0
	position 0 0 100000
	headlight TRUE
	navType ["EXAMINE"]
	speedFactor 1.0
	zNear -1
	zFar -1
	jump TRUE
	retainUserOffsets FALSE
	isDefault FALSE
	description ""
	triggerName "Synchronize"
	logFeature [""]
}

Filter: X3D only | Avalon only | All

id	Name	DataType	PartType	Default	ValueType	Description
	description	SFString	initializeOnly			Text description or navigation hint to be displayed for this Bindable. Hint: make descriptions clear and readable. Warning: without description, Bindable (e.g. Viewpoint objs) can not be activated/deactivated with keyboard or gui messages (e.g. switched with PgUp bzw PgDn)
	fieldOfView	SFFloat	initializeOnly	0.785398	(0, pi)	Preferred minimum viewing angle from this viewpoint in radians. Small field of view roughly corresponds to a telephoto lens, large field of view roughly corresponds to a wide-angle lens.
	geoOrigin	SFNode	initializeOnly		GeoOrigin	The geoOrigin field is used to specify a local coordinate frame for extended precision.
	geoSystem	MFString	initializeOnly	'GD','WE'		Defines the geographic coordinate system that will be used for the geospatial coordinates in that node.
	headlight	SFBool	initializeOnly	TRUE		Enable/disable directional light that always points in the direction the user is looking
	isDefault	SFBool	initializeOnly	FALSE		indicates if the object is the default bindable or not (generated if the scene did not contain any Bindable of a missing Type (e.g. Viewpoint))
	navType	MFString	initializeOnly	EXAMINE	ANY; WALK; FLY; LOOKAT; EXAMINE; NONE;	Specifies the navigation type that is to be bound when this GeoViewpoint node is bound. The acceptable values for this field are the same as those for the type field of the NavigationInfo node. ANY: browser may choose the navigation paradigm that best suits the content; WALK: exploring a virtual world on foot or in a vehicle that rests on or hovers above the ground; FLY: similar to WALK except that terrain following and gravity may be disabled or ignored; LOOKAT: explore a scene by navigating to a particular object; EXAMINE: viewing individual objects, spin the user's eyepoint about the center of rotation in response to user actions; NONE: disables and removes all browser-specific navigation user interface
	speedFactor	SFFloat	initializeOnly	1.0	[0, inf)	Default rate at which viewer travels through scene, meters/second. The speedFactor is used as a multiplier to the elevation-based velocity that the node sets internally.
	triggerName	SFString	initializeOnly	Synchronize		name of the dynamic context-slot which is used by the run-time environment (e.g. Jobs) to trigger the node. Life-Nodes will automatically connect the context-eventOutut to the triggerSlot-eventInput Slot.
	bind	XFAny	inputOnly			sending any event to this slot will bind/activate the Bindable
	set_bind	SFBool	inputOnly			Sending event set_bind=true makes this node active. Sending event set_bind=false makes this node inactive. Thus setting set_bind to true/false will pop/push (enable/disable) this Bindable
	transformation_result	SFMatrix4f	inputOnly			this slot is used to transform the view to the given local transformation. It is mainly used to return the camera transformation after processed by a NavigationEvaluator
	triggerSlot	SFTime	inputOnly			slot which is used internally to connect a dynamic context-slot which name is set by the triggerName value. Its used automatically to install run-time environment trigger.
	children	MFNode	inputOutput			the children fields allow to place object relative to the current camera transformation.
	effects	MFNode	inputOutput		VisualEffects	Specifies the desired global effects like depth of field and motion blur for the post-processing step that are specific to a certain camera or lens type.
	jump	SFBool	inputOutput	TRUE		Sspecifies whether the user's view jumps to the position and orientation of a bound node or remains unchanged
	logFeature	MFString	inputOutput		state, child, parent, route, eventIn, eventOut	controls the logging of changes, state: log state changes (e.g. live), child: log child add/remove, parent: log parent add/remove, route: log route add/remove; eventIn: log receiving of events, eventOut: log sending of events: guiView, runtime system should create node-view, guiEdit: runtime system should create node-editeverything: log everything
	metadata	SFNode	inputOutput		MetadataObject	container for payload metadata inside MetadataSet element
	navigator	MFNode	inputOutput		Navigator3D	holds the 3d navigator which will be called for bound nodes
	orientation	SFRotation	inputOutput	0 0 1 0		Rotation of Viewpoint, relative to default -Z axis direction in local coordinate system. Hint: this is orientation _change_ from default direction (0 0 -1) +Y axis is the up vector for the local area (the normal to the tangent plane on the ellipsoid), -Z points towards the north pole, and +X is east 1 0 0 -1.57 always looks down.
	position	SFVec3d	inputOutput	0 0 100000		Position relative to local georeferenced coordinate system, in proper format
	retainUserOffsets	SFBool	inputOutput	FALSE		retainUserOffsets is FALSE, the viewer is returned to the originally defined viewpoint position/orientation after local navigation
	splitGroup	SFNode	inputOutput		SplitGroup	holds SplitGroup node for this bindable
	zFar	SFFloat	inputOutput	-1		z-far position; used for clipping
	zNear	SFFloat	inputOutput	-1		z-near position; used for clipping
	bindTime	SFTime	outputOnly			Event sent when node becomes active/inactive.
	isBound	SFBool	outputOnly	FALSE		Event true sent when node becomes active, event false sent when unbound by another node.
	isInteractive	SFBool	outputOnly	FALSE		Event true sent when node becomes interactive, user can navigate the view transformation
	transformation_request	SFMatrix4f	outputOnly			sends a new request to evaluate a local transformation. Its mainly used together with a NavigationEvaluator node to verify the transformation given by the navigator