instantreality 1.0

• Node 12
• SceneBaseNode 17
• BoundedNode 18
• TransmitterPdu

XML encoding

<TransmitterPdu whichGeometry='1'
readInterval='0.1'
writeInterval='1.0'
networkMode='standAlone'
isStandAlone=''
isNetworkReader=''
isNetworkWriter=''
siteID='0'
applicationID='1'
entityID='0'
address='localhost'
port='0'
multicastRelayHost=''
multicastRelayPort='0'
rtpHeaderExpected='false'
isRtpHeaderHeard=''
isActive=''
timestamp=''
radioID='0'
antennaLocation='0 0 0'
antennaPatternLength='0'
antennaPatternType='0'
cryptoKeyID='0'
cryptoSystem='0'
frequency='0'
inputSource='0'
lengthOfModulationParameters='0'
modulationTypeDetail='0'
modulationTypeMajor='0'
modulationTypeSpreadSpectrum='0'
modulationTypeSystem='0'
power='0.0'
radioEntityTypeCategory='0'
radioEntityTypeCountry='0'
radioEntityTypeDomain='0'
radioEntityTypeKind='0'
radioEntityTypeNomenclature='0'
radioEntityTypeNomenclatureVersion='0'
relativeAntennaLocation='0 0 0'
transmitFrequencyBandwidth='0'
transmitState='0'
bboxCenter='0 0 0'
bboxSize='-1 -1 -1'
render='TRUE'
showBBox='FALSE'
logFeature=''
 />

Classic encoding

TransmitterPdu {
	whichGeometry 1
	readInterval 0.1
	writeInterval 1.0
	networkMode standAlone
	isStandAlone 
	isNetworkReader 
	isNetworkWriter 
	siteID 0
	applicationID 1
	entityID 0
	address "localhost"
	port 0
	multicastRelayHost ""
	multicastRelayPort 0
	rtpHeaderExpected false
	isRtpHeaderHeard 
	isActive 
	timestamp 
	radioID 0
	antennaLocation 0 0 0
	antennaPatternLength 0
	antennaPatternType 0
	cryptoKeyID 0
	cryptoSystem 0
	frequency 0
	inputSource 0
	lengthOfModulationParameters 0
	modulationTypeDetail 0
	modulationTypeMajor 0
	modulationTypeSpreadSpectrum 0
	modulationTypeSystem 0
	power 0.0
	radioEntityTypeCategory 0
	radioEntityTypeCountry 0
	radioEntityTypeDomain 0
	radioEntityTypeKind 0
	radioEntityTypeNomenclature 0
	radioEntityTypeNomenclatureVersion 0
	relativeAntennaLocation 0 0 0
	transmitFrequencyBandwidth 0
	transmitState 0
	bboxCenter 0 0 0
	bboxSize -1 -1 -1
	render TRUE
	showBBox FALSE
	logFeature [""]
}

Filter: X3D only | Avalon only | All

id	Name	DataType	PartType	Default	ValueType	Description
	whichGeometry	SFInt32	initializeOnly	1		Select geometry to render: -1 for no geometry, 0 for text trace, 1 for default geometry.
	readInterval	SFTime	initializeOnly	0.1		Seconds between read updates, 0 means no reading.
	writeInterval	SFTime	initializeOnly	1.0		Seconds between write updates, 0 means no writing.
	networkMode	SFFloat	initializeOnly	standAlone		Whether this entity is ignoring the network, sending DIS packets to the network, or receiving DIS packets from the network. (1) standAlone: ignore network but still respond to events in local scene. (2) networkReader: listen to network and read PDU packets at readInterval, act as remote copy of entity. (3) networkWriter: send PDU packets to network at writeInterval, act as master entity. Default value quotestandAlonequote ensures that DIS network activation within a scene as networkReader or networkWriter is intentional.
	isStandAlone	SFBool	initializeOnly			Whether networkMode="local" (ignore network but still respond to local events)
	isNetworkReader	SFBool	initializeOnly			Whether networkMode="remote" (listen to network as copy of remote entity)
	isNetworkWriter	SFBool	initializeOnly			Whether networkMode="master" (output to network as master entity at writeInterval)
	siteID	SFInt32	initializeOnly	0		EntityID site.
	applicationID	SFInt32	initializeOnly	1		EntityID application ID, unique for application at that site.
	entityID	SFInt32	initializeOnly	0		EntityID unique ID for entity within that application.
	address	SFString	initializeOnly	localhost		Multicast address, or else "localhost" example: 224.2.181.145.
	port	SFInt32	initializeOnly	0		Multicast port example: 62040.
	multicastRelayHost	SFString	initializeOnly			Fallback server address if multicast not available locally example: devo.cs.nps.navy.mil.
	multicastRelayPort	SFInt32	initializeOnly	0		Fallback server port if multicast not available locally example: 8010.
	rtpHeaderExpected	SFBool	initializeOnly	false		Whether RTP headers are prepended to DIS PDUs.
	isRtpHeaderHeard	SFBool	initializeOnly			Whether incoming DIS packets have an RTP header prepended.
	isActive	SFBool	initializeOnly			Have we had a network update recently?.
	timestamp	SFTime	initializeOnly			DIS timestamp in VRML units.
	radioID	SFInt32	initializeOnly	0		Identifies a particular radio within a given entity (entityID). The radioID is assigned sequentially, starting with 1.
	antennaLocation	SFVec3f	initializeOnly	0 0 0		Provides the location of the transmitter antenna in the DIS coordinate system. Note that the DIS specification allocates 64-bit floating point values for the components of the antenna location vector, whereas it is represented here as SFVec3f for maximmum interoperability with X3D.
	antennaPatternLength	SFInt32	initializeOnly	0		Specifies the length of the Antenna Pattern Parameters field in octets (value is a multiple of 8).
	antennaPatternType	SFInt32	initializeOnly	0		Indicates the type of representation for the radiation pattern from the antenna enumerated value: 0 = omnidirectional; 1 = beam; 2 = spherical harmonic.
	cryptoKeyID	SFInt32	initializeOnly	0		Indicates whether the crypto equipment is in the baseband encryption mode or the diphase encryption mode (high order bit of the 16-bit field) and provides the key identifier (lower order 15 bits).
	cryptoSystem	SFInt32	initializeOnly	0		Identifies the crypto equipment used enumerated value: - (negative) = other; 1 = KY-28; 2 = KY-58; 3 = Narrow Spectrum Secure Voice (NSVE); 4 = Wide Spectrum Secure Voice (WSVE); 5 = SINCGARS ICOM.
	frequency	SFInt32	initializeOnly	0		Specifies the center frequency (in Hertz) being used by the radio for transmission. Note that the DIS specification allocates a 64-bit unsigned integer to represent frequency values, whereas it is limited to SFInt32 in X3D.
	inputSource	SFInt32	initializeOnly	0		Specifies which position or data port in the entity utilizing the radio is providing the input audio or data being transmitted enumerated value: 0 = other; 1 = pilot; 2 = copilot; 3 = first officer; 4 = driver; 5 = loader; 6 = gunner; 7 = commander; 8 = digital data device; 9 = intercom.
	lengthOfModulationParameters	SFInt32	initializeOnly	0		No description in the specification.
	modulationTypeDetail	SFInt32	initializeOnly	0		Contains detailed information depending on the Major Modulation Type (modulationTypeMajor).
	modulationTypeMajor	SFInt32	initializeOnly	0		Provides the major classification of the modulation type enumerated value: 0 = other; 1 = amplitude; 2 = amplitude and angle; 3 = angle; 4 = combination;5 = pulse; 6 = unmodulated.
	modulationTypeSpreadSpectrum	SFInt32	initializeOnly	0		Indicates the spread spectrum technique or combination of techniques in use enumerated value: 0 = frequency hopping; 1 = pseudo-noise; 2 = time hopping; 3-15 are to be determined.
	modulationTypeSystem	SFInt32	initializeOnly	0		Specifies the interpretation of the modulation parameter field(s) in the Transmitter PDU (enumerated value): 0 = other; 1 = generic; 2 = HQ; 3 = HQII; 4 = HQIIA; 5 = SINCGARS; 6 = CCTT SINCGARS.
	power	SFFloat	initializeOnly	0.0		Provides the average power (in units of dBm) of the radio entity transmission.
	radioEntityTypeCategory	SFInt32	initializeOnly	0		Specifies the main category describing the radio entity.
	radioEntityTypeCountry	SFInt32	initializeOnly	0		Identifies the country to which the design of the radio entity is attributed.
	radioEntityTypeDomain	SFInt32	initializeOnly	0		the field designates the domain of operation of currently 6 radio enumerated values
	radioEntityTypeKind	SFInt32	initializeOnly	0		An 8-bit enumeration (eg value of 7 indicates Entity Kind of "Radio").
	radioEntityTypeNomenclature	SFInt32	initializeOnly	0		Specifies the nomenclature for a particular communications device.
	radioEntityTypeNomenclatureVersion	SFInt32	initializeOnly	0		Designates the specific modification or individual unit type of a series and/or family of equipment.
	relativeAntennaLocation	SFVec3f	initializeOnly	0 0 0		Provides an offset from the location of the transmitter entity to simulate placement of antennas some distance from the transmitter equipment.
	transmitFrequencyBandwidth	SFFloat	initializeOnly	0		Identifies the bandpass of the transmitting radio entity.
	transmitState	SFInt32	initializeOnly	0		No description in specification.
	bboxCenter	SFVec3f	initializeOnly	0 0 0		Bounding box center: position offset from origin of local coordinate system.
	bboxSize	SFVec3f	initializeOnly	-1 -1 -1		Bounding box size: automatically calculated, can be specified as an optimization or constraint.
	render	SFBool	inputOutput	TRUE		Flag to control the visibility of the node or subtree
	showBBox	SFBool	inputOutput	FALSE		Show Bounding Box of Subtree.
	logFeature	MFString	inputOutput		state, child, parent, route, eventIn, eventOut	controls the logging of changes, state: log state changes (e.g. live), child: log child add/remove, parent: log parent add/remove, route: log route add/remove; eventIn: log receiving of events, eventOut: log sending of events: guiView, runtime system should create node-view, guiEdit: runtime system should create node-editeverything: log everything
	metadata	SFNode	inputOutput		MetadataObject	container for payload metadata inside MetadataSet element